Hard Wall Picture Hangers

Use these picture hangers to hang pictures, plaques, tools, what have you onto cinderblock and concrete or wood walls.. Will hold up to 25 lbs if you have them anchored good.

Magnetic Picture Hangers

These hangers are completely magnetic and instantly attach to any steel surface. You don't have to drill any holes or use any nails or screws. This hanger has a rubber coating so it don't scratch or mar your surface. These hangers have a strong magnet and will hold the weight listed below with out slipping

Brick Clip Picture Hangers

This zinc plated Brick Clip picture hanger clips to bricks as in fire places and brick walls allowing you to hang a picture on a brick wall. Has special springs holding pictures very secure. Fits standard 2 1/8 to 2 3/8 bricks. The images shows front and back views.

Also shown, is the custom made bronze brick clip which looks and works simular to the zinc plated brick clip hanger shown. The Bronze Brick Clip one is made to fit 2 1/2 to 2 3/4 inch bricks.

Moulding Hooks

These hangers are used to hang pictures from moulding that is secured around a wall. The larger part of the hooks you see go over this moulding, then the picture framing wire goes over the smaller bottom hook. The length of the wires are adjusted so that you can hang your pictures at any height you wish, without having to be constantly driving nails into the wall. Indeed, you don't have to drive any nails ! These are used in lots of galleries and homes where many pictures are hung, or are constantly being changed around. The hangers on the left above are narrow (1/4" wide) and made of heavy brass. The hangers on the right are wider (5/8 " wide) and both are 1 3/4 " long, and both fit over the exact same moulding Both are equally strong and will hold large pictures. This moulding is usually brought at building supply centers. The hooks can be bent to custom fit the mouldings. These Moulding Hooks have been much requested by our customers !

Mighty Hangers

On large heavy pictures use two of these hangers instead of using screw eyes. Then you connect the hanging wire to these hangers. Makes a very secure mount for the larger pictures. No worrying about screw eyes pulling out. When screwed down to the frame, there is a built in loop that sticks up for putting the wire around, this is not seen in the picture. Our Mighty Hangers come with screws. These work great!

Suction Cups

These professional 1 1/2 inch suction cups are of a very high quality and feature excellent clarity. They stick really good and work great to hang pictures and objects on window and glass surfaces. They will easily hold a pound. We use these to hang signs on our doors, and windows. They will stick to any really smooth flat surface.

Plate Hangers
These hangers are used to hang plates, plaques and other decorative objects. Simple to use, you just place the two hooks over the edge of the plate, stretch the springs and place the other two hooks over the opposite edge. Then bend the hooks for the desired hanging angle.

Steel Ledge Nails

These Steel Ledge Nails are 2 1/4 inches long and are used as a ledge or shelf for display of pictures in mats or frames, or used as a hook. They can be driven into most walls, cinder blocks, plaster, mortar, and even some brick. These are case hardened steel nails and are very, very strong. They come unfinished and should be painted after driving into wall. They look wonderful when covered with gold paint.

White Cup Hooks

These cup hooks are called 7/8 inch size. They measure 7/8 inch from the top most point to the edge of the flat part that meets the wood, wall or ceiling. The overall length is 1 3/8 inches. The width of the hook is 3/4 inch.

These pure white cup hooks are SO useful, we use them everywhere. Perfect for hanging up cups, rulers, folders, notes, hundreds of uses.

Super Sale! Overstocked! Sold Below Our Costs!

Brass Cup Hooks

This brand of cup hooks is hard to find. Notice the bases have the large flat base which snugs up nicely to whatever you screw the cup hook into. Most cup hooks don't have this wide base. This base is an extreamly nice feature. This kind of cup hook is hard to find. They are 1/2 inch size. They grab and hold extremely well. We use these on the bottoms of shelves to hang christmas orniments and other things on, that are for sale in our store. They look very nice.